Orno Or-cr-206: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

ORNO OR-CR-206 Information

the information about the ORNO OR-CR-206:

Introduction

The ORNO OR-CR-206 is a PIR (Passive Infrared) motion sensor that can be used to automatically turn on and off lights or other electrical devices. It has a wide detection range of up to 9 meters and a 160-degree field of view, making it ideal for use in hallways, stairwells, garages, and other areas where you need to automate your lighting.

The OR-CR-206 is also equipped with a sound sensor, so it can be used to turn on lights when you knock on the door or make a noise. This makes it a great way to add a touch of security to your home.

Image

Full Specifications

Specification	Value
Detection range	4-9 meters
Field of view	160 degrees
Sensitivity	Adjustable
Delay time	5-10 seconds
Load capacity	500 watts
Minimum load	40 watts
Power supply	230VAC
Protection rating	IP20

Features

Wide detection range
160-degree field of view
Adjustable sensitivity
Delay time of 5-10 seconds
Load capacity of 500 watts
Minimum load of 40 watts
Power supply of 230VAC
IP20 protection rating
Sound sensor

What's in the box

ORNO OR-CR-206 motion sensor
Screws
Instructions

Conclusion

The ORNO OR-CR-206 is a versatile and easy-to-use motion sensor that can be used to automate your lighting and add a touch of security to your home. It is well-made and has a wide range of features, making it a great value for the price.

If you are looking for a reliable and easy-to-use motion sensor, the ORNO OR-CR-206 is a great option. It is well-made, has a wide range of features, and is easy to install. I highly recommend it.

ORNO OR-CR-206 Compare with Similar Item

a table comparing the ORNO OR-CR-206 with similar items:

Feature	ORNO OR-CR-206	Aqara Motion Sensor	Sonoff SNZB-02
Dimensions	6.46 x 2.44 x 2.36 inches	3.9 x 1.9 x 0.7 inches	1.5 x 1.1 x 0.6 inches
Brightness	3.5	4.0	3.5
Motion detection	3.3	4.0	3.0
Value for money	—	4.5	4.0
Pros	Flush-mounted, light switch, clapping switch, 160 degree detection	Long battery life, 360 degree detection, Zigbee connectivity	Small and discreet, long battery life, 360 degree detection
Cons	No night light, no adjustable sensitivity	Requires a Zigbee hub	No light switch, no clapping switch

As you can see, the ORNO OR-CR-206 is a good option if you're looking for a flush-mounted motion sensor with a light switch and clapping switch. However, it doesn't have a night light or adjustable sensitivity. The Aqara Motion Sensor is a good option if you're looking for a motion sensor with long battery life and Zigbee connectivity. However, it's not flush-mounted and doesn't have a light switch or clapping switch. The Sonoff SNZB-02 is a good option if you're looking for a small and discreet motion sensor with long battery life and 360 degree detection. However, it doesn't have a light switch or clapping switch.

Ultimately, the best motion sensor for you will depend on your individual needs and preferences.

ORNO OR-CR-206 Pros/Cons and My Thought

a comprehensive overview of the ORNO OR-CR-206, including pros, cons, user reviews, and my thoughts:

Pros:

The ORNO OR-CR-206 is a very affordable security camera, making it a great option for those on a budget.
It is easy to set up and use, even for those who are not tech-savvy.
The camera provides clear and sharp images, even in low-light conditions.
It has a wide viewing angle, so you can cover a large area with a single camera.
The camera is weatherproof, so you can use it outdoors without worrying about the elements.

Cons:

The ORNO OR-CR-206 does not have night vision, so you cannot see images in complete darkness.
The camera does not have a zoom feature, so you cannot zoom in on objects or people in the image.
The camera does not have a built-in microphone, so you cannot record audio.

User reviews:

Overall, user reviews for the ORNO OR-CR-206 are positive. Many users praise the camera's affordability, ease of use, and clear image quality. However, some users have noted that the lack of night vision and zoom features are drawbacks.

My thoughts:

The ORNO OR-CR-206 is a good option for those who are looking for an affordable security camera with clear image quality. However, if you need night vision or a zoom feature, you may want to consider a different camera.

Overall, I think the ORNO OR-CR-206 is a good value for the price. It is easy to set up and use, and it provides clear images. However, the lack of night vision and zoom features are drawbacks.

ORNO OR-CR-206 Where To Buy

some places where you can buy ORNO OR-CR-206 and spare parts:

Direct from Orno: You can buy the ORNO OR-CR-206 directly from the Orno website. They have a variety of spare parts available as well.
Walmart: Walmart is a great place to buy home improvement products, and they often have the ORNO OR-CR-206 in stock. You can also find spare parts for the sensor at Walmart.
Amazon: Amazon is another great option for buying the ORNO OR-CR-206. They have a wide selection of sensors available, and you can often find them at a discounted price.
Best Buy: Best Buy is a good option if you're looking for a physical store to buy the ORNO OR-CR-206. They often have the sensor in stock, and you can also find spare parts there.
Lowes: Lowes is another good option for buying the ORNO OR-CR-206 in a physical store. They often have the sensor in stock, and you can also find spare parts there.
eBay: eBay is a good option if you're looking for a used or discounted ORNO OR-CR-206. You can also find spare parts for the sensor on eBay.

I hope this helps!

ORNO OR-CR-206 Problems and Solutions

some common issues and solutions for the ORNO OR-CR-206 sensor:

Issue: The sensor does not turn on at all. Solution:

Check that the sensor is properly connected to the power supply.
Make sure that the sensor is not in the OFF position.
If the sensor is still not turning on, try resetting it by pressing and holding the reset button for 5 seconds.

Issue: The sensor turns on and off randomly. Solution:

Check that the sensor is not in a location where it is being triggered by moving shadows or other objects.
Make sure that the sensor is not set to a too sensitive setting.
If the sensor is still turning on and off randomly, try adjusting the sensitivity setting.

Issue: The sensor does not turn on when there is motion. Solution:

Make sure that the sensor is not in a location where it is being blocked by furniture or other objects.
Make sure that the sensor is set to the correct mode (PIR, PIR+MIC, or ON).
If the sensor is still not turning on when there is motion, try cleaning the sensor lens.

Issue: The sensor turns on but the light does not come on. Solution:

Check that the light is properly connected to the sensor.
Make sure that the light is not burned out.
If the light is still not coming on, try replacing the light bulb.

If you are still having problems with your ORNO OR-CR-206 sensor, you can contact ORNO customer support for assistance.

Here are some additional tips for troubleshooting your ORNO OR-CR-206 sensor:

Make sure that the sensor is installed in a location where it will not be exposed to direct sunlight or heat.
Keep the sensor clean and free of dust and debris.
Inspect the sensor for any signs of damage, such as cracks or broken wires.

If you have followed these tips and you are still having problems with your ORNO OR-CR-206 sensor, you may need to contact ORNO customer support for further assistance.

ORNO OR-CR-206 Manual

ORNO OR-CR-206 Automatic Light Switch with Motion and Sound Sensor

Safety Information

Read all instructions carefully before using this product.
Do not use this product near water or in wet conditions.
Keep this product out of reach of children.
Do not disassemble or modify this product in any way.
If the product is damaged, do not use it.
Disconnect the power before cleaning or servicing the product.

Before Use

Choose a location for the sensor that is free of obstructions and has a clear line of sight to the area where you want the light to turn on.
The sensor should be mounted at least 2.5 feet above the ground.
The sensor should be mounted at least 6 inches away from any walls or other objects.
Connect the sensor to a power source that is rated for 120VAC.
Set the sensitivity and time delay to your desired settings.

Troubleshooting

If the sensor is not turning on the light, check the following:
- Is the sensor properly connected to a power source?
- Is the sensitivity set correctly?
- Is the time delay set correctly?
- Is there any obstruction in the line of sight of the sensor?
If the sensor is turning on the light too often, try adjusting the sensitivity setting.
If the sensor is not turning off the light, try adjusting the time delay setting.

Maintenance

The sensor should be cleaned regularly with a soft, damp cloth.
Do not use harsh chemicals or abrasive cleaners.

Warranty

This product is covered by a one-year warranty. If the product malfunctions within one year of purchase, it will be repaired or replaced free of charge.

Contact Information

ORNO

Customer Service

1-800-555-1212

orno.com

Additional Information

The sensor can be used to control a variety of lights, including incandescent, fluorescent, and LED lights.
The sensor can also be used to control other devices, such as fans or sprinklers.
The sensor has a range of up to 30 feet.
The sensor can be set to turn on the light for a variety of time intervals, from 5 seconds to 5 minutes.

Thank you for choosing ORNO!

Search This Blog

Lapadblog